JT-OBA/220
Kleinn Air Horns
INSTALLATION MANUAL
REV: C (6/25/2021)
21
8
On-Vehicle Mechanical Assembly
Complete the following steps on-vehicle using a lift, vehicle ramps, or other safe lifting method.
DANGER
:
Follow all manufacturer’s instructions for safely lifting vehicle; reference owner’s manual.
8.1
Attach Bracket to Vehicle (JT-100)
1.
Slide the bracket into position. The front of the bracket slides over the skid plate below the
transfer case (1), and the back of the bracket slides over rear crossmember (2). Slightly bend the
compressor mounting plate with your hands to slide the heads of the bolts over crossmember.
**NOTE:
Image shown for reference. Tank must not be on bracket to allow access to rear bolt
mounting point.
See 9.1.3
2.
Use 2x
, &
to secure the front of the bracket to the skid plate (1).
