Kleinn Air Horns JT-OBA, Руководство по установке

Страница: 9 / 36

JT-OBA/220
Kleinn Air Horns INSTALLATION MANUAL
Go to Table of Contents REV: C (6/25/2021) 9
4.2 Install Process Outline
For person(s) with prior experience installing JT-OBA/JT220, a reminder of the install steps is provided
below:
UNPACKAGE KIT ( SECTION 7 )
1. Layout and organize all parts
BENCH ASSEMBLY ( SECTION 8 )
2. Assemble air fittings to air tank
3. Prepare tank bracket and tank straps
4. Assemble compressor to OBA bracket
5. Remove horn trumpets from drivers (JT220 Only)
6. Attach horn drivers to horn bracket (JT220 Only)
ON-VEHICLE MECHANICAL ASSEMBLY ( SECTION 9 )
7. Attach OBA bracket to vehicle
8. Attach air tank (with fittings) to OBA bracket
9. Assemble air filter to air compressor
10. Attach horn bracket (with drivers) to vehicle (JT220 only)
11. Re-Attach horn trumpets to horn drivers (JT220 only)
12. Route air lines between compressor, tank, and remote coupler (& horns)
ON-VEHICLE ELECTRICAL ASSEMBLY ( SECTION 10 )
13. Install relay & fuse, route wiring, and install horn button
14. Connect all electrical items (air horn(s), pressure switch, air compressor)
FINAL STEPS ( SECTION 11 )
15. Test system
4.3 Approximate Installation Time
JT-OBA & JT220 are multi-faceted products consisting of mechanical, electrical, and pneumatic
components.
For a typical home mechanic, auto enthusiast, or technician installing this kit for first time; a professional
installation job with setup and testing of final product, is estimated to take:
•
6.5 hours
END OF SECTION