JT-OBA/220
Kleinn Air Horns
INSTALLATION MANUAL
REV: C (6/25/2021)
33
9.6
Connect Pressure Switch
1.
Route wiring, as desired, to the air tank and connect to the pressure switch, per wiring diagram.
NOTE
: Either pressure switch wire can be connected to relay or ignition; they are identical.
9.7
Connect Air Compressor
1.
Route wiring, as desired, to the air compressor and connect, per wiring diagram.
9.8
Connect Air Horn Solenoid(s)
1.
Route wiring, as desired, to the air horns and connect to the solenoid(s), per wiring diagram.
NOTE
: Either air solenoid wire can be connected to power (PWR) or ground (GND); they are
identical.
9.9
Secure Wiring to Vehicle
1.
Insert all wiring into included wire loom and ensure loom is away from all sharp edges,
hot/moving vehicle parts, (i.e., exhaust, engine, radiator) and fasten securely to vehicle using
supplied zip ties or equivalent.
END OF SECTION
