User Manual
Klegg Electronics Inc.
36
www.klegg.com
Chapter 10 NDAS Command Line Utility
Included with the 3.2 Drivers is a option to run your NetDisk software from a command
line interface.
*Please Note: These option are for Advanced NetDisk users only*
1. Open your Command Line and type in the following command.
cd "%programfiles%\NDAS\System"
(
Folder may vary depending on driver being used
)
This should bring you to the path C:\Program Files\NDAS\System.
2. Next, type in ndascmd.exe. This will load the NDAS command line interface.
The Syntax for the interface should be as follows.
ndascmd <command> [parameters]
The command can be one of the following.
- register <name> <device id without dash> [write key]
- unregister <device number>
- list devices
- list logicaldevices
- mount <logical device number> [ro|rw]
- unplug <logical device number>
- dismount <logical device number>
- activate <device number>
- deactivate <device number>
