User Manual
Klegg Electronics Inc.
21
www.klegg.com
7.2 NDAS Bind Management
You can run
NDAS Bind Management
tool from Windows Start > Programs > NDAS Soft-
ware > NDAS Bind Management menu. You can create, remove and configure NDAS bind
using this tool and you can also check current status of the bind from it. You can operate
NDAS devices or NDAS bind by selecting and clicking right mouse button.
7.3 Before bind
All NDAS devices to bind must be registered with write key and must be online status. And
they must not be mounted on any PCs including the PC which performs the bind operation.
Make sure that all NDAS devices to bind is in Ready status. If the device is
In use
status,
check which PC has mounted the devices using Properties menu > Hosts tab and dismount
the device from the PC. And press
Refresh
button or
F5
key to refresh.
