User Manual
Klegg Electronics Inc.
22
www.klegg.com
7.4 Creating Mirror without destroying data
Use
Add Mirror
menu to create a mirror(RAID1) while keeping the contents of disk.
1. Select NDAS device which you want to keep data and click right mouse button.
2. Select
Add Mirror
menu
and than select a device
that you want to use as a
mirrored disk.
3. Synchronizing process will be started once you have mounted the devices in read/write
mode. But until devices are fully synchronized, they will run in recovery mode. In this
mode, you can access the contents but the access speed may be slow. And mirror
(RAID1) cannot protect data against original disk's failures in this mode. So it is recom-
mended to wait until synchronization is completed before use.
4. You can check the
current progress of
synchronization from
NDAS Bind Manage-
ment.
