KKT chillers vBoxX 10, Инструкция по эксплуатации

Страница: 36 / 82

36 / 82 83000602.Ke
 Further information: The effect of fire can cause the container to burst or explode.
Ignitable gas-air mixtures possible under certain conditions.
Measures in case of accidental release:
 Environmental protection methods: Do not allow it to get into the sewers or bodies of
water. Pick up in sand, soil or a similar absorbent material. Place in containers for proper
disposal.
 Cleaning methods: Clean the contaminated area with water. Caution! Slipping hazard!

Further information: Inform the police or competent authorities if it penetrates the water
or sewers.
Personal protective equipment:
 Respiratory protection: Not applicable if sufficient ventilation provided. Self-container
breathing apparatus within enclosed rooms, in case of inadequate oxygen supply,
substantial or uncontrollable release. Only use respiratory protection in accordance with
international / national standards. Use breathing apparatus only, not filter equipment.

Hand protection: Protective globes. Recommended material: Nitrile rubber.
 Eye protection: Tight-fitting safety glasses/goggles.
Handling and storage:
 Handling: Avoid lengthy skin contact. Avoid breathing in high concentration mist. Avoid
breathing in high concentration fumes.

Storage: Suitable material for containers: Mild steel. Close unused containers tightly to
prevent the penetration of moisture. Keep away from strong oxidants.
4.10. Reasonably foreseeable misuse
Reasonably foreseeable use by chiller users means foreseeable use in a way not intended in the
instruction manual. It is due to foreseeable human behaviour.
The following hazardous situations can be derived from predictable human error:
 Dangerous voltage in electrical components if the machine is not safely disconnected from
the power supply before it is opened.

The fan and compressor can start up suddenly, without the condition of the machine
changing visibly.
 Even if the machine has been disconnected from the power supply, the surfaces of
components in the unit can be very hot or cold.
 Risk of damage to external hydraulics components if the cold water flow is mixed up with
the cold water return.

Danger caused by pouring unapproved media into the unit.

Danger caused by connected an unspecified voltage source
.