Kiturami KGW- 8BE, Руководство по обслуживанию

Страница: 6 / 38

ㅣ Installing Boiler ㅣ
1. The hot water heater has to be fixed horizontally to the wall with some space for cleaning and maintenance.
2. The wall should support enough to hang 25 ~ 35kg of hot water heater and be incombustible surface
3. Before installing the water heater, check the pipes and valves for domestic hot water in & out-let, and gas.
ㅣSelecting Location ㅣ
1. Please select the location and position, considering some space for cleaning and maintenance.
2. The wall should support enough to hang the water heater of 35 ~45kg. If need, reinforce the wall before installing.
3. Corrosive gas [ex. Ammonia gas, Chloric gas, Sulfur, Acids, etc] can destroy or rust the water heater, flues, and pipes by a
chemical reaction. And it may reduce the efficiency of heater or igniter. Please avoid this location or clean up the place
before installing water heater.
4. he water heater should be installed onto the incombustible surface.
5. Please avoid the wet place and hermetically sealed location.
The water heater can be installed on any suitable internal wall (suitable sound proofing may be required when installing onto a stud partition wall).
Provision must be made to allow for the correct routing of the flue and setting of the terminal to allow the safe and efficient removal of the flue
products.
Where a room sealed appliance is installed in a room containing a bath or shower, the appliance and any electrical switch or appliance control,
utilizing mains electricity should be situated specifically in accordance with current IEE Wiring Regulation.
[Installing water heater]
1. The water heater has to be installed horizontally to the wall with some space for cleaning and maintenance.
2. The water heater has to be fixed firmly with special bolt for its weight and tightly against any vibration.
It is recommended to stick the rubber against vibration.
2-2 Water heater Installation
6페이지