Kiturami KGW- 8BE, Руководство по обслуживанию

Страница: 31 / 38

Custom Temperature control : Control Gas pressure and RPM of Fan, comparing custom temperature, inlet cold water
temperature and flow
[that is, combust with high gas pressure in case of large temperature difference and with low gas pressure,
in case of small temperature difference.]
▶ LNG [for EXPORT]
⑥ Re-ignition after failure of burning during operation :15sec ± 1sec
When sensing the failure of burning, cut off supply of gas and repeat Re-ignition according to routine
[PRE PURGE, PRE IGNITION, Supply of Gas, Sensing flame].
4). Combustion Specifications
UNIT 15 [26.2kW] UNIT 13 [22.7kW]
FAN keep value for working
50
130
FAN value 60 70
When flame sensor detects flame during PRE PURGE, proceeding progress is halted,
Re-ignition after performing POST PURGE for 15±1 sec.
⑦ Initial flame sensing [02 ERROR]
KGW identify it consecutively for 3±1 sec, print out [02 ERROR] on Temp. controller and Fan works.
70 70
At the moment flame is no more detected, previous function operates.
[On derequisition of initial flame sensing, Fan halts for 1 sec and combustion progresses for 1 minute.]
UNIT 10 [17.4kW] UNIT 8 [13.9kW] capacity
60
70
Max. of Ignition
current(electric)
Standard Max. RPM
Output
60
60
10
155
FAN working value duration
Max. of combustion
current(electric)
Min. of combustion
current(electric)
Min. of Ignition
current(electric)
Max. of Fan output
Min. of Fan output
Fan output on ignition
120
95
50
78
55
65
60
100
70
10
147
53
60
130
80
50
120
65
130
118
10
178
55
10
194
65
100
55
75
78
120
60
125
65
75
70
65
98
130
120
78
95
55
78 Standard Min. RPM
RPM
Sensing
Time
(sec)
Flaimes
sensing
31페이지