KITO Harrington RY Series, Руководство пользователя

Страница: 79 / 120

79
Figure 6-42
Figure 6-43
6.7 Storage
6.7.1 The storage location should be clean and dry.
6.7.2 Care should be taken to not damage any of the electrical power cords or fittings.
6.8 Outdoor Installations
6.8.1 For trolley hoist installations that are outdoors, the trolley hoist shall be covered and protected from the
weather at all times.
6.8.2 A NEMA 4 rated pendant shall be used.
6.8.3 Avoid trolley hoist oxidation by using suitable treatment and lubricating all mechanisms.
6.8.4 Possibility of corrosion on components of the trolley hoist increases for installations where salt air and
high humidity are present. The trolley hoist may require more frequent lubrication and frequent
operation. Make regular inspections of the unit's condition and operation.
6.8.5 For trolley hoist installations where temperature variations introduce condensation into the trolley
hoist may require additional inspection and more frequent lubrication and operation.
6.8.6 Refer to Section 2.1.2 for allowable environmental conditions.
6.9 Operational Environment
6.9.1 Non-conforming environment – A non-conforming environment is defined as one with any or all of
the following.
•
Explosive gases or vapor.
•
Organic solvents or volatile powder.
•
Excessive amounts of powder and dust of general substances.
•
Excessive amount of acids or salts.