KITO Harrington RY Series, Руководство пользователя

Страница: 63 / 120

63
6.2 Lubrication
6.2.1 Wire Rope:

For proper performance the Wire Rope must be maintained in a clean and well lubricated condition.
 The rope should be lubricated every 3 months (more frequently for heavier usage or severe conditions).

To lubricate the rope, first remove any dirt, grime, moisture or other accumulations of contaminates.
Then coat the Wire Rope with the grease specified in
Table 6-6 . Ensure that the lubricant is applied to
the entire surface of the rope over its entire length, especially around the hook block sheave and at the
rope guide. After grease application, repeatedly operate the lift and lower function of the hoist under
no-load to evenly spread the grease throughout the length of the wire rope.
 For dusty environments, dry lubricants are suggested.

For conditions not permitting lubricant to fall off the wire rope, consider using non-dripping lubricant.
6.2.2 Wire Rope Drum, Hook Block and Sheaves:
 The drum, hook block and sheaves should be lubricated every 3 months (more frequently for heavier
usage or severe conditions).
 Lubricate the Drum, Hook Block and Sheaves with grease in Table 6-6 .
 For dusty environments, dry lubricants are suggested.
 For conditions not permitting lubricant to fall off the drum, hook block and sheaves, consider using non-
dripping lubricant.
6.2.3 Trolley Wheels and Gears:
 The Trolley Wheels and Gears should be lubricated every 3 months (more frequently for heavier usage
or severe conditions).
 Lubricate the Trolley Wheels and Gears with grease in Table 6-6 .
 For dusty environments, dry lubricants are suggested.
 For conditions not permitting lubricant to fall off the trolley wheels and gears, consider using non-
dripping lubricant.
6.2.4 Hoist and Trolley Gearboxes – The hoist and trolley gearboxes are lubricated with grease and should
not need any lubricant replacement.
 If necessary, replace according to Table 6-7 .