KITO Harrington RY Series Скачать руководство пользователя страница 100 | Manualshive

Страница: 100 / 120

background image

100

8.0

Warranty

All products sold by Harrington Hoists, Inc. are warranted to be free from defects in material and
workmanship from date of shipment by Harrington for the following periods:

1 year   –   Electric and Air Powered Hoists (excluding (N)ER2 Enhanced Features Models,
                   EQ / SEQ Hoists), Powered Trolleys, Powered Tiger Track Jibs and Gantries, Crane
                   Components, Spare / Replacement Parts, Below-the-Hook and Material Handling
                   Equipment

2 years – Manual Hoists & Trolleys, Beam Clamps

3 years – (N)ER2 Enhanced Features Model Hoists, EQ / SEQ Hoists, RY Wire Rope Trolley
Hoists

5 years – Manual Tiger Track Jibs and Gantries, TNER, EQ / SEQ and RY Pull-Rotor Motor
Brake

10 years – (N)ER2 “The Guardian” Smart Brake

The product must be used in accordance with manufacturer’s recommendations and must not have
been subject to abuse, lack of maintenance, misuse, negligence, or unauthorized repairs or
alterations.

Should any defect in material or workmanship occur during the above time period in any product,
as determined by Harrington Hoist’s inspection of the product, Harrington Hoists, Inc. agrees, at its
discretion, either to replace (not including installation) or repair the part or product free of charge
and deliver said item F.O.B. Harrington Hoists, Inc. place of business to customer.

Customer must obtain a Return Goods Authorization as directed by Harrington or Harrington’s
published repair center prior to shipping product for warranty evaluation. An explanation of the
complaint must accompany the product. Product must be returned freight prepaid. Upon repair,
the product will be covered for the remainder of the original warranty period. Replacement parts
installed after the original warranty period will only be eligible for replacement (not including
installation) for a period of one year from the installation date. If it is determined there is no defect,
or that the defect resulted from causes not within the scope of Harrington’s warranty, the customer
will be responsible for the costs of returning the product.

VFD Harrington Hoists, Inc. disclaims any and all other warranties of any kind expressed or implied
as to the product’s merchantability or fitness for a particular application. Harrington will not be liable
for death, injuries to persons or property or for incidental, contingent, special or consequential
damages, loss or expense arising in connection with the use or inability whatever, regardless of
whether damage, loss or expense results from any act or failure to act by Harrington, whether
negligent or willful, or from any other reason.

«
...
98
99
100
101
102
...
»

Содержание Harrington RY Series

























































































































Отзывы:

Нет отзывов

Похожие инструкции для Harrington RY Series

Бренд: Feider Machines Страницы: 53

Бренд: Jet Страницы: 9

MAXIBINDER 202705

Бренд: Austlift Страницы: 10

Бренд: WARRIOR Страницы: 5

Бренд: TBEI Страницы: 17

Бренд: J. D. NEUHAUS Страницы: 72

Бренд: YATO Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды