2-26
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
REMOVING THE OVEN DOOR GLASS, HINGES, & HANDLE
CAUTION:
When you work on the dual fuel
range, be careful when handling the sheet
metal parts. Sharp edges may be present, and
you can cut yourself if you are not careful.
WARNING
FIRE HAZARD
Shut off gas supply line valve before servic-
ing the range.
Check all gas line connections and replace
all panels before operating the range.
Failure to do so could result in explosion, fire,
or other injury.
1.
Remove the oven door from the range
(see page 2-25).
2.
Place the oven door on a padded work
surface with the front decorative glass
facing down.
3.
Remove the two top door liner screws and
the two door glass bracket screws, and lift
the liner assembly off the decorative door
glass and handle.
4.
To remove the outer door glass:
a) Remove the three outer glass holder
screws and two outer glass bracket
screws from the door liner.
b) Lift the outer glass with the glass holder
off the door liner.
c) Remove the bracket.
5.
To remove the center door glass,
re-
move the bottom bracket, (it is loose), and
slide the two top corners of the glass out of
the door liner slots.
Top Liner Screws
Door Glass
Bracket Screws
Outer Glass Holder Screws
Outer Glass Bracket Screws
Outer Door Glass
Center Door Glass Corners
Remove Loose Bracket
Center Door Glass
