2-19
6.
To remove the convection fan motor:
a) If not already done, remove the con-
vection cover and the convection bake
element from the rear of the oven liner
(see page 2-18).
b) Use a 10 mm (7/16˝) socket and re-
move the hex nut from the convection
fan. NOTE: The nut has a left-rotation
thread for removal.
10 mm
(7/16˝)
Hex Nut
Convection
Fan
d) Pull the range away from the wall so
that you can access the rear panel.
e) Remove the braces and rear panel
from the range (see page 2-17).
c) Remove the three front convection fan
motor screws from the rear of the oven
liner.
Convection
Fan Motor
Front Screw
(1 of 3)
f) Remove the two convection fan motor
mounting screws and remove the mo-
tor from the rear of the range.
BACK OF RANGE
Convection Fan Motor
Convection Fan Motor
Rear Screw (1 of 2)
Convection Fan
Motor Terminals