KISANKRAFT KK-TH-525 Скачать руководство пользователя страница 28

Страница: 28 / 44

KisanKraft

PETROL ENGINE



: www.kisankraft.com



: [email protected]



: +91.80. 22178200

Page 28 of 44

For 4-Stroke engine:

The gasoline engine is not

filled with engine oil before it is delivered

from the factory. Please fill it with engine oil

firstly

The fuel tank shall not be overfilled (The fuel

level shall not be higher than the neck of the

oil filler); inspect whether the fuel tank cap is

properly covered after the refueling is

completed.

Check the lubricating oil level

1. Shut down the gasoline engine and place it at

horizontal level.

2. Dismount the engine oil rule and check the oil

level, which shall be up to the oil filler.

3. If the oil level is low, fill the recommended

lubricating oil to the oil filler

4. Remount the oil rule.

INSPECTION OF RESPECTIVE SECTIONS:

Make sure to inspect these sections before operating the engine.

Inspection of fuel



Is sufficient quantity of oil reserved?



Is not the fuel degenerated?



Use the proper fuel referring to the “Fuel”

section.

CAUTION



Sufficient care must be taken on the fire not only when replenishing but also

handling fuel. It could cause fire or explosion.



Securely close the oil tank cap. Fuel may leak if the cap is tightened aslant. It

will never leak if the cap is tightened properly.

(Excluding: TL tank cap breather type)

Inspection of clogging



Check the cooling fins, around the muffler and cooling air inlet for trash or

withered grasses trapped.



Remove them if necessary

Inspection of air cleaner



Is not fouled the air cleaner element?



When the element is fouled or it is not impregnated with oil, inspect and service

it in accordance with “Inspection and servicing before each operation”

Inspection of screws and nuts

Содержание KK-TH-525













































Результаты поиска

Содержание KK-TH-525

Отзывы:

Похожие инструкции для KK-TH-525

Бренды по названию

Популярные бренды

KISANKRAFT KK-TH-525, Руководство по эксплуатации

Результаты поиска

Содержание KK-TH-525

Отзывы:

Похожие инструкции для KK-TH-525

Бренды по названию

Популярные бренды