KisanKraft
TM
PETROL ENGINE
: www.kisankraft.com
: +91.80. 22178200
Page 30 of 44
START (STARTER LEVER TYPE UNIT)
1.
Turn the engine switch to the “ON”
side.
2. Set the throttle lever at the slowest
speed position.
3. Push the priming button repeatedly with
finger till it hits the top. (More than 10
times)
Pressing the priming button is
necessary to prime the fuel to facilitate
the start-up. Since any excess amount
of primed fuel returns to the tank, there
is no problem of over-priming. Prime the
fuel rather more than sufficiently to
avoid starting trouble.
4. Turn down the starter lever of carburetor
to set it at the start position.
It is not necessary to operate the starter
lever when the engine is warmed up
(For about 15 minutes after stopping the
engine.)
(To be left in the operating position)
Depending on specifications, the starter
lever may be provided at the throttle
wire side.
5. While holding down the engine firmly,
grasp the recoil starter grip and pull
vigorously
CAUTION:
a) When the engine stops on
the way after starting, or
b) When the engine fails to
start after trying the recoil
operation for 7 to 8 times.
Return the starter lever to the operating
position and try the recoil operation.
Engine
switch
S
low
speed
