IOM/GK(P)/CONICAL ISSUE DATE: 10.11.2015
Page 6 LAST REV. DATE: 01.08.2019
A.1 DIRECTIVE 2014/34/EU
It is a legal requirement that machinery and equipment put into service within
certain regions of the world shall conform to the applicable CE Marking Directives
for Equipment for Potentially Explosive Atmospheres (ATEX).
Where applicable the Directive covers important safety aspects relating to the
equipment, its use and the satisfactory provision of technical documents. Where
applicable this document incorporates information relevant to these Directives. To
establish if the product itself is CE marked for a Potentially Explosive Atmosphere
check the name plate and the Certification provided.
A.1.1 Disclaimer
Information in these User Instructions is believed to be reliable. In spite of all the
efforts of KIRLOSKAR BROTHERS LTD. to provide sound and all necessary
information, the content of this Manual may appear insufficient and is not
guaranteed by KIRLOSKAR BROTHERS LTD. as to its completeness or accuracy.
A.2 Personnel qualifications and training
All personnel involved in the operation, installation, inspection and maintenance of
the unit must be qualified to carry out the work involved. If the personnel in
question do not already possess the necessary knowledge and skill, appropriate
training and instruction must be provided. If required, the operator may commission
the manufacturer/supplier to provide applicable training.
A.3 Maximum surface temperature (Temperature Class)
Special attention must be paid to the marking on the ATEX name plate as the use
of ‘pirate’ spare parts will invalidate the ATEX certification. It is essential to heed
the instruction prohibiting dismantling of the equipment in a flammable atmosphere
where applicable.
EQUIPMENT MUST BE EARTHED AND ONLY GENUINE KBL SPARES USED DO
NOT DISMANTLE IN FLAMMABLE ATMOSPHERE.
A.4 CE Marking & Approvals
General:
It is a legal requirement that the machinery & equipment put into service in certain
region of the world shall conform with the applicable CE marking directives
covering pump, accessories & instruments in the package for potentially Explosive
Atmosphere (ATEX). The applicable documents incorporating information relevant
to their directives will be provided separately e.g. CE marking & ATEX marking
certification, additional safety instructions & directives etc., as applicable.
Kirloskar pumps GK(P) range of pumps are certified to comply with the ATEX
directives 2014/34/EU & user is to ensure compliance with the European Directive
2014/34/EU.
