IOM/GK(P)/CONICAL ISSUE DATE: 10.11.2015
Page 20 LAST REV. DATE: 01.08.2019
GK(P) PUMPS – TAPPINGS CONNECTIONS CHART
*
This special provision on
request / application requirement only.
– Will be applicable only for jacketed pump.
Code
Description
Location of connection when viewed from
driving end
A
Gauge connection discharge side.
On pump discharge flange.
B
Gauge connection suction side.
On suction flange right.
C
Flushing line connection.
On casing top left.
D
Pump casing drain.
On pump casing bottom side towards
suction.
G1*
Bearing housing cooling water inlet.
On bearing housing right.
G2*
Bearing housing cooling water outlet.
On bearing housing right.
H
Air breather cap.
On bearing housing top.
J1 -
St. box jacket heating steam inlet.
Casing cover top left.
J2 -
St. box jacket heating steam outlet.
Casing cover bottom right.
K
Constant level oiler.
On bearing housing left.
M
Bearing housing oil drain.
On bearing housing left.
N*
Drip pan drain.
On bearing housing bottom right.
P
Pad cooling water inlet for centre line
mounted pumps.
On pad for centre line mounted pump
casing.
Q
Pad cooling water outlet for centre
line mounted pumps.
On pad for centre line mounted pump
casing.
R*
For drain cock and piping.
On pump casing bottom.
BE*
For bulls eye indicator.
On bearing housing both sides.
