Kirk 600v3, Руководство по установке и настройке

Страница: 98 / 205

98 Configuring KIRK Wireless Server 600v3
14117800, Ed.2
7.6.1.7 Configuring DECT System
(Primary)
1
Under the Configuration menu, click DECT , and then click System .
Figure 51 Adm. Page: Configuration/DECT/System page
2
In the Name field, the name MUST ALWAYS be DECT .
If changing the name, the system cannot operate.
3
In the PDW (password) field, type the password, and then type it again in the field below.
4
From the Subscriptions list, select either Allow Anonymous , With User AC only , or
Disabled.
Note:
It is recommended to select With User AC only . When subscribing a new handset to
the system it is possible to use an authentication code (AC). If you want to use the
authentication code, you must select
With User AC only . For more information about
subscription of handsets and authentication codes, refer to “Subscribing Handsets” on page
162 .
5
From the Tones list, select a ring tone.
6
If SIP Protocol: Select the Enbloc Dialing check box.
The Enbloc Dialing check box has to be enabled in a SIP configuration in order for the
handset to collect all digits, before passing them on to a call handler for routing.
Note: The Enbloc Dialing check box is not to be selected, when using H323 Protocol or
SKINNY Protocol.