Kirk 600v3, Руководство по установке и настройке

Страница: 116 / 205

116 Configuring KIRK Wireless Server 600v3
14117800, Ed.2
7.6.4.2 Assigning a Specific IP Address
(Secondary)
To assign a specific IP address to the KIRK Wireless Server 600v3, it is necessary to disable the
DCHP mode and then assign a specific IP address to the KIRK Wireless Server 600v3. The new IP
address and network address will be provided by the system administrator.
Note: It is advisable that the IP addresses for KIRK Wireless Server 600v3 secondaries are
numbered in succession; eg. 192.168.1. 3 , 192.168.1. 4 , 192.168.1. 5 etc. This makes it easier to
detect a specific Secondary KIRK Wireless Server 600v3.
1
Under the Configuration menu, click ETH0 , and then click DHCP .
Figure 69 Adm. Page: Configuration/ETH0/DHCP page
2 From the Mode list, select Disabled , and then click OK .
3 Click Reset (under Administration menu) to save your configuration.
4 Under the Configuration menu, click ETH0 , and then click IP .
Note:
It is necessary to use the ETH0 port when integrating the KIRK Wireless Server 600v3
on the local network.