Kirk 600v3, Руководство по установке и настройке

Страница: 28 / 205

28 Introduction to KIRK Wireless Server 600v3
14117800, Ed.2
2.2.3 KIRK Handsets
2.2.3.1 Environmental Requirements
• The area where the KIRK Handset is used must be within the temperature ranges of 10°C and
40°C.
• For correct battery charging, the room temperature must be between 0°C and 25°C. Therefore,
the handset must not be placed in direct sunlight. The battery has a built-in heat sensor which
will stop charging if the battery temperature is too high.
• For battery information, refer to “Installing Battery” on page 65 .
• The area where the KIRK Handset is used must be between 20% and 80% non-condensing
relative humidity.
2.2.3.2 Electrical Requirements
The following electrical requirement must be met:
• The supplied power for the charger must be 110 V to 120 V ac nominal (or 220 V to 230 V ac
nominal), 50/60 Hz.
2.2.4 KIRK Maintenance Software
This section describes the computer requirements to run the installation and maintenance tools of
the KIRK Wireless Server 600v3.
2.2.4.1 Software Requirements
• OS: Windows 2000 (SP4), Windows XP (SP2), Windows Vista (for the web based
Administration Page of the KIRK Wireless Server 600v3, OS can also be: Linux, Macintosh)
• CPU: Minimum 400MHz (2000/XP), 1GHz (Vista)
• RAM: Minimum 256 MB (2000/XP), 1 GB (Vista)
• GPU/Display: XGA (1024x768)
• Harddisk: Minimum recommended harddisk size by OS and other installed applic 25
MB free space for the application.
Note:
Depending on other applications running on the system, CPU, RAM and harddisk may
vary.