Kirk 600v3, Руководство по установке и настройке

Страница: 139 / 205

Configuring KIRK Wireless Server 600v3 139
KIRK Wireless Server 600v3 Installation and Configuration Guide
2
In the Gatekeeper area:
• From the Mode list, select Standby . Selecting Standby defines the KIRK Wireless Server
600v3 as an alternative (Standby) Master.
3 In the Radio field:
• Select the Disable check box to disable the radio.
4 Save the configuration now or wait until you have finished configuring the whole installation.
For more information about saving the configuration, refer to “Saving Configurations” on
page 150 .
7.8.3 Configuring LDAP Server
In a KIRK Wireless Server 600v3 Multi-cell solution it is possible to configure an LDAP Server to
handle all handset/user registration data (such as name, directory number, IPEI etc.).
If you configure an LDAP Server to handle all handset/user registration and read/write information
between the primaries and secondaries of a KIRK Wireless Server 600v3 solution, then the Master
KIRK Wireless Server 600v3 only manage the connection to the call handler.
Note:
Configuring an LDAP Server is only recommended in very large multi-cell installations
(more than 500-600 handsets).
Figure 89 KWS600v3 Multi-cell installation with LDAP Server
In the LDAP Server tab you configure the LDAP Server.
Note:
The LDAP Server tab is only available, if the Master is LDAP Server check box on the
Master tab is deselected.