7
8
7
4. Basic Operation
(2) LCD Display
Appear when [F] is pressed to enter the shortc ut function menu.
Appear when the transmitting output power is set low.
Appear when the Sound Control function is activated.
Appear when the CTCSS function is activated.
Appear when the DCS function is activated.
Appear when positive offset reverse frequency is set.
Appear when negative offset reverse frequency is set.
Appear when the Reverse Frequency function is act ivated.
Appear when the memory channel has contained data.
Appear when the channel number has been locked out.
Appear when the Battery Save function is activated.
Appear when the Auto Power Off function is activated.
S-meter (RX) and relative RF power meter (TX).
Display the channel number.
Appear when the keypad is locked.
Show the battery power.
Appear when the beep function is activated.
Appear when the scramble function is activated.
Appear when the ANI function is activated.
VOX
CT
DCS
R
APO
Display various alphanumeric information such as operating
frequency or menu selection.
Adjust the Volume
Press and hold the Monitor Button and
meanwhile rotate the Power / Volume
Switch to adjust the volume.
Select the Frequency / Channel
In the full- frequency display mode, rotate the Ch-
annel Selector to select the desired frequency;in
the memory frequency mode or the channel
mode,rotate the Channel Selector to select the
desired channel.
Switch on
Rotate Power / Volume Switch clockwise to
turn on the transceiver. A
du
sounds and
the transceiver is in the operational state.
PTT Button
To make a call, press and hold [PTT], the LED
lights red, then speaks into the microphone in
your normal voice.
Note: Please keep your mouth away from
microphone 3cm-5cm.
ICON
DESCRIPTION
Appear when
offset reverse frequency is set.
Appear when
offset reverse frequency is set.
Appear when the Auto Power off function is activated.
Appear when the Scrambler function is activated.
Appear when the Beep function is activated.
