background image

Do not keep or transit the battery with metals (like necklace).

Do not press or throw the battery; do not use obviously defective or 

twisted battery. 

Do not use nail or sharp materials to puncture the battery; do not beat 

or trample on the battery.

Do not weld the battery directly.

To avoid damaging the safety system of the battery, do not destroy or 

modify it; do not disassemble and assemble or remodel the battery.

Do not put the battery in a microwave oven or pressure cooker.

Do not use the battery together with the following batteries, such as 

one-shot batteries (alkaline cell) or secondary batteries of different 

capacities,brands, and standards or factories. A new battery can not 

be used together with an old one.

If the battery sends out abnormal odor, becomes heat, discolours or 

twists; or finding any abnormal while using, charging or keeping it, 

please remove the battery from the equipment or the charger and stop 

using it.

If the battery leaks or sends out abnormal odor, please remove it from 

any open fire immediately, or the leaked electrolyte may fire and the 

battery may explode.

Please keep children away from the battery, if children swallow the  

    battery, please see a doctor immediately.

If the battery leaks and the electrolyte goes into the eyes, do not rub 

them, but clean them and see a doctor immediately, or that may hurt 

your eyes.

Do not reverse charge or forcibly over discharge the battery.

Do not use the battery in other inappropriate equipments. 

CONTENTS

1. Unpacking and Checking the Equipment

1    

Supplied Accessories

1

2. Preparation

 

 

2

 

(1) Charging the Battery Pack

 2

   (2) Installing / Removing the Battery Pack

   3

   (3) Installing the Antenna

    4

   (4) Installing / Removing the Belt Clip

 4

   (5) Installing the Optional Speaker / Microphone

4

3. Getting Acquainted

 5

   (1) Exterior Figure

  5

   (2) LCD Display

  7

4. Basic Operation

   8

5. Menu Setting

 11

Menu Description

  11

    Menu Items

    11

6. Channel Memory

           12

7. Scan

         15

8. Auxiliary Functions

         16

9. Specifications

      

22

10. Troubleshooting Guide

    22

  

 

Содержание PT 3800(1)
















Отзывы: