Kioti PX1002 Скачать руководство пользователя страница 134

Страница: 134 / 223

opERATIoN

THE CAUTIONs WHEN COm-

ING IN AND OUT Of WORK fIElD

T85o536A

1. Make sure that the left and right

pedal are interlocked.

2. Enter and exit the field by driving

the tractor at a right angle to the

bank.

3. It is recommended to use the 4Wd

and drive backward when moving

onto a bank.

TG1O509A

PRECAUTIONs WHIlE DRIvING ON THE ROAD

(1) brake pedal (lH) (2) brake pedal (RH)

(3) pedal Interlock

(A) Whenever traveling on the road

1. When you change the driving di-

rection on the road, let the other

car know your direction with turn

signal lights.

2. do not use high beam headlights

when another vehicle is approach-

ing from the opposite direction so

that not to interrupt another driver’s

view.

3. Always interlock the left and right

brake pedal while driving on the

public road.

(1) Turn Signal light

TG1O418A

When you are driving on the

road, observe all local traffic

and safety regulations. If not,

you can have an accident of

bodily injury on a person.

Only the operator should ride

on the tractor unless a pas-

senger seat is installed.

•

WARNING

TG110-AU-05.indd 17

2013-01-22 오전 10:29:53

Содержание PX1002
































































































































































































































Результаты поиска

Содержание PX1002

Отзывы:

Kioti PX1002, Руководство пользователя, Страница: 134 / 223

Результаты поиска

Содержание PX1002

Отзывы: