1011026 User Manual Issue 01 (26.10.2021)
3
1.
Health and Safety
These warnings are provided in the interest of safety. You must read them carefully before installing or using
the equipment.
It is important that this document is retained with the equipment for future reference. Should the equipment
be transferred to a new owner, always ensure that all relevant documents are supplied in order that the new
owner can become acquainted with the functioning of the equipment and the relevant warnings.
To ensure that the equipment described is safe both for personnel and property it should be installed,
inspected, and maintained by or under the supervision of qualified persons (Electrician)
Covers must be kept locked. Observe all hazard labels and take appropriate action to avoid exposure to the
risks indicated. Ensure that you are familiar with the safe working areas and accesses. Ensure that the working
area is adequately lit.
The power supply to the equipment should be isolated at the main RCD before lifting the blower cover.
Take care to maintain correct posture, particularly when lifting. Use appropriate lifting equipment when
necessary. Always keep proper footing and balance. Avoid any sharp edges.
Health & Safety at Work, etc. ACT 1974
Regard should be taken of IEE Wiring Regulations, Codes of Practice, Statutory Requirements, and any specific
instructions issued by the supplier of these details.
Earthing - All equipment must be earth bonded in accordance with the latest IEE Wiring Regulations. For
clarity this has not been shown.
We reserve the right to alter these details without prior notice.
2.
Declaration of Conformity
This product meets all the essential safety requirements of the relevant European Directives.
The full text of the Declaration of Conformity can be provided upon request.
3.
General Description
The DTP control Panel is used to control and monitor the Kingspan Klargester Domestic Wastewater Treatment
Units. It is capable of operating multiple pump/motor outputs at set times in accordance with pre-determined
timetables.
4.
General Operation
The control unit continuously monitors the internal timetables and operates the appropriate pump/motor
outputs according to a timetable entry. The status is shown on the display. The current time continues to be
updated internally by battery backup when the mains fail, and the control unit continues normally upon mains
being restored.
5.
Applicable Firmware
The operation described in this manual refers to control units with the following firmware:
Firmware ID
Description
Version
FMW-1112
Kingspan 1002510
RV1.22
6.
Technical Support
Technical support &
PIN
may be obtained from:
Kingspan Water & Energy
–
Service
College Road,
Aylesbury
HP22 5EW
Phone UK: 03332406868
Phone ROI: 04838362400
Or
Contact Kingspan Area Sales Manager
