background image

 

                                     

 

 

 

 

        

DECLARATION OF CONFORMITY 

                                                            IN ACCORDANCE WITH ISO/IEC 17050:2004 

 

Manufacturer’s Name:

 

 

Kingfisher International Pty. Ltd. 

Manufacturer’s Address:

 

 

720 Springvale Road, Mulgrave, Victoria 3170, Australia 

hereby declares, that the products listed below 

 

Product Name: 

 

Automated Variable Optical Attenuator 

 

Model Number: 

 

KI 7000 Series 

 

Product Options: 

 

This declaration covers all options of the above product(s) 

comply with the essential requirements of the applicable European Directives:   

 

Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC, amended by 93/68/EEC, and carries the CE marking accordingly 

 

Directive 2002/95/EC on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) 

 

Directive 2002/96/EC on waste electrical and electronic equipment (WEEE). The instrument can be disposed of local retail shop with 
WEEE collection point. 
 

and conform to the following standards and specifications: 

MIL-PRF-28800F: 1996 Performance specification -Test equipment for use with electrical and electronic equipment, general specification 
IEC 60529: 2001/ EN 60529:1993+A1:2003 Degrees of protection provided by enclosures                                                                      

EMC 

Limit 

IEC 61326:2002 / EN 61326-1:1997+A1:1998+A2:2001+A3:2003 
IEC CISPR 11: 2004/ EN 55011:1998+A1:1999 

Limits applicable to Group 1 Class B equipment  

IEC CISPR 16-1:1999                                                                                         Limits applicable to Class B equipment 
IEC CISPR 16-2:1999                                                                                         Limits applicable to Class B equipment 
IEC 61000-3-2: 2005/EN 61000-3-2:2006 
IEN 61000-3-3:2002/EN 61000-3-3:1995 
IEC 61000-4-2:2001 / EN 61000-4-2:1995+A1:1998+A2:2001 

4kV CD, 8kV AD 

IEC 61000-4-3:2002/ EN 61000-4-3:2002                         

3V/m, 80-1000MHz 

IEC 61000-4-4:2004/EN 61000-4-4:2004                                                           1kV signal lines, 2kV power lines 
IEC 61000-4-5:2005/EN 61000-4-5:2006                                                           1kV line-line, 2kV line-ground 
IEC 61000-4-6:2004/EN 61000-4-6:1996+A1:2001                                            3V, 0.15-80 MHz 
IEC 61000-4-11:2004/EN 61000-4-11:2004                                                        0.5 cycle/100%/each polarity 
 
ICES-001: 2006 (Canada) 
CFR 47 FCC Part 15, Subpart B (Exempted devices) (USA) 

 
 
 
 
 
 
 
 

 

Supplemental Information: 

The product was tested in a typical configuration with Kingfisher International test systems. 

 

 
 
 

 
 

 
 

 
 
 

30 Aug 2016 
Date 

 

 

 

 
 
 

Bruce Robertson           

 

Name 
 
Director 
Title 

For further information, please contact your local Kingfisher International sales office, agent or distributor. 

 
Revision: G  

 

 

 

Issue Date: 30 August 2016                    

Содержание KI 7010B Series















































Отзывы: