JUNE 2022 / Rev: 1.0
2022
4. Make sure that the rest of the Xanbus devices in your system are connected to the Xanbus net
work.
5.Follow the instructions in the Insight Home manual to connect your computer to the Insight
Home’s WiFi access point and log in to Insight Local (the Insight Home, Insight Facility
or Gateway internal web application) using the Admin user and password
6.In InsightLocal.
a.Because you will make setting changes to the XW Pro, put the XW Pro into
Standby.
b.Click “Setup” in the green top horizontal menu
i.Click “Configuration” in the left-hand vertical menu.
1.Click
“Modbus settings”
a.In Modbus settings: Set the Baud Rate to 19200; Parity to “none”; Stop bits to 1;
Error limit to 3; Timeout (ms) to 1000
b. Click “Apply”
ii. Click “Device Detection”
1. Click “Detect Devices”
a.Set the Range from 1 to 63. Click “Detect”. Wait until device detection is
complete.
This manual
is f
or
use b
y qualified personnel
onl
y
64
For information about operating the Conext XW Pro Inverter/Charger, see the Conext XW Pro Inverter/Charger Owner’s Guide (975-0240-01-01).
Содержание HAB 7.5
Страница 1: ...INSTALLATION INTEGRATION GUIDE KiloVault HAB SCHNEIDER XW PRO UL9540 Base Kit JUNE 2022 Rev 1 0 ...
Страница 19: ...This manual is for use by qualified personnel only JUNE 2022 Rev 1 0 2022 17 ...
Страница 73: ...JUNE 2022 Rev 1 0 This manual is for use by qualified personnel only 71 ...