Kikusui PFX2500 Series, Руководство по эксплуатации, Страница: 60 / 144

60
PFX2512
Setting the Model ID
Set the model ID using IO Config of BPChecker3000.
For details, see the help file for IO Config of BPChecker3000.
1
Turn on the router or switching hub, PC, and then the PFX2512.
2
Start IO Config.
3
Click the channel selection search button, check that the PFX2512 you want to
configure is displayed, and then click Connect.
If a different channel is displayed, select the appropriate channel.
4
On the Model ID tab, click Select.
The Setting of Model ID dialog box appears.
5
Select the check boxes for the DC power supply and electronic load to use.
The available model IDs are displayed.
6
Select the model ID you want to use, and click OK.
The Setting of Model ID dialog box closes, and the model ID is displayed.
7
Click Send.
The model ID is sent to the selected PFX2512. Setting of the model ID is complete.
You can check whether the ID has been assigned correctly by clicking Search under
Select Ch.
1 It may not be possible to use up to the power specified here due to loss in cables. (
p. 21
)
2 Factory default settings
3 A separate cable is required. For details, contact your Kikusui agent or distributor.
See
If the combination and the selected model ID do not match, you will not be able to execute charge
/ discharge tests. Be careful when setting the model ID.