Kikusui PFX2500 Series, Руководство по эксплуатации, Страница: 29 / 144

PFX2512
29
Connecting the Power Cord
2
C
o
nn
ec
ting
an
d C
o
nfigurin
g Devic
e
s
Connecting to the switchboard
■
Switchboard breaker requirements
• Rated current: 30 A (100 V system), 15 A (200 V system)
For safety reasons, circuit breakers exceeding the specified current cannot be used
• Only use the breaker with this PFX2512.
• Keep the breaker readily accessible at all times.
• Indicate that the circuit breaker is dedicated for use with this PFX2512 and that it is used to
disconnect the product from the AC power line.
WARNING
Risk of electric shock.
• Before you connect the power cable, turn off the switchboard breaker (a switch that cuts off
the power supply from the switchboard).
Risk of electric shock or fire.
• Be sure to have a qualified engineer make the connection to the switchboard.
• The switchboard breaker must meet the requirements shown below.
CAUTION
Inside the product, protection circuits are connected to match the polarity of the input terminal. Be
sure to connect the L, N, and (GND) terminals correctly between the switchboard and the
product.
• In an emergency, turn off the switchboard breaker to separate the product from the AC power
line.
• Risk of damage to test data and malfunction. To perform charge/discharge tests safely, connect
the power cords of each device to the same AC power line, and insert the plugs in the same type
of outlet.
N
L
N
L
Connection to a switchboard
(PWR1201L example)
PWR1201L
30 A
Breaker indication example
PWR1201L
Breaker dedicated
to the PWR1201L
Switchboard