manualshive.com logo in svg

Kikusui LIN Series, Руководство по эксплуатации

Операционное руководство Kikusui LIN серии доступно для загрузки бесплатно на нашем сайте. Пользователи могут скачать нужный руководство для работы с устройством. Получите доступ к руководству по эксплуатации на manualshive.com и начните использовать ваш продукт с уверенностью.

Поделиться
Скачать
background image

2

LIN-JF

Thank you for purchasing the LIN1020JF, LIN3020JF, or
OP01-LIN1020JF Line Impedance Network.

About the manuals

This manual provides an overview of the product and notes on
usage. It also explains how to configure it, operate it, perform
maintenance on it, and so on.
This manual only provides general information about the AC
power supplies (PCR-LE and PCR-LE2 series) that are used
in combination with this product. For details on the AC power
supplies, see the operation manual provided with the respec-
tive product.
You can download the most recent version of these manuals
from the Kikusui Electronics Corporation website (http://
www.kikusui.co.jp/en/download/).

Target audience of these manuals

This operation manual is intended for users who will use the
LIN1020JF, LIN3020JF, or OP01-LIN1020JF Line Impedance
Network. It is also intended for instructors who will teach these
users.
Explanations are given under the presumption that the reader
has knowledge of the electrical aspects of line impedance net-
works.

How to read this manual

This manual is designed to be read from beginning to end. We
recommend that you read it thoroughly before using this prod-
uct for the first time.

Copyrights

The contents of this manual may not be reproduced, in whole
or in part, without the prior consent of the copyright holder.
The specifications of this product and the contents of this man-
ual are subject to change without prior notice.
Copyright© 2014 Kikusui Electronics Corporation

• In this manual, the following products are also referred to 

simply by their model names.
LIN1020JF Line Impedance Network as the LIN1020JF
LIN3020JF Line Impedance Network as the LIN3020JF
OP01-LIN1020JF Line Impedance Network as the OP01-
LIN1020JF or OP01

• In this manual, the following line impedance networks are 

also referred to collectively as the LIN-JF.
LIN1020JF
LIN3020JF
OP01-LIN1020JF

• In this manual, the following AC power supplies are also 

referred to collectively as the AC power supply.
PCR-LE Series
PCR-LE2 Series

• The term “PC” is used to refer generally to both personal 

computers and workstations.

• This manual also uses the following abbreviations to refer to 

the following wiring systems.
Single-phase two-wire as 1P2W
Single-phase three-wire as 1P3W
Three-phase three-wire as 3P3W
Three-phase four-wire as 3P4W

• This manual refers to each phase of a wiring system as U 

phase, V phase, W phase, and N phase. These phases cor-
respond respectively to the R, S, T, and N phases used in 
other manufacturers’ products.

• The following markings are used in the explanations in this 

manual.

Indicates a potentially hazardous situation which, if
ignored, could result in death or serious injury.

Indicates a potentially hazardous situation which, if
ignored, may result in damage to the product or other
property.

Indicates information that you should know.

Explanation of terminology or operation principle.

Indicates a reference to detailed information.

Notations used in this guide

WARNING

CAUTION

DESCRIPTION

See

Содержание LIN Series











































































Отзывы:

Нет отзывов

Похожие инструкции для LIN Series

Landoll 2510 Series Operator'S Manual preview
2510 Series
Бренд: Landoll Страницы: 34
Native Instruments TRAKTOR KONTROL S4 User Manual preview
TRAKTOR KONTROL S4
Бренд: Native Instruments Страницы: 86
Native Instruments Maschine Reference Manual preview
Maschine
Бренд: Native Instruments Страницы: 245
Qu-Bit Electronix RT60 User Manual preview
RT60
Бренд: Qu-Bit Electronix Страницы: 15
Saadat Dena User Manual preview
Dena
Бренд: Saadat Страницы: 61
Saadat Dena 350 Service Manual preview
Dena 350
Бренд: Saadat Страницы: 22
Wasp Clay Kit Original Instructions Manual preview
Clay Kit
Бренд: Wasp Страницы: 50
Wayflex SHAKE IT User Manual preview
SHAKE IT
Бренд: Wayflex Страницы: 11
DeVilbiss PulseDose LT PD1000 Instruction Manual preview
PulseDose LT PD1000
Бренд: DeVilbiss Страницы: 58
Ganter Norm GN 305 Operating Instructions Manual preview
GN 305
Бренд: Ganter Norm Страницы: 20
Garland SHAKER KEEPER 20V 200 Instruction Manual preview
SHAKER KEEPER 20V 200
Бренд: Garland Страницы: 84
IMG STAGELINE STROBE-180 Quick Manual preview
STROBE-180
Бренд: IMG STAGELINE Страницы: 2
Klippan BELT-FIX Manual preview
BELT-FIX
Бренд: Klippan Страницы: 8
Kewtech KT63 PLUS Operating Instructions Manual preview
KT63 PLUS
Бренд: Kewtech Страницы: 32
nox W7 LINK Instructions For Use preview
W7 LINK
Бренд: nox Страницы: 2
Gardigo 62317 Instruction Manual preview
62317
Бренд: Gardigo Страницы: 20
Nektar Impact iX49 User Manual preview
Impact iX49
Бренд: Nektar Страницы: 21
EPTA Bonnet Neve KALEIDO H12 EFFICIA Design User Instructions preview
Bonnet Neve KALEIDO H12 EFFICIA Design
Бренд: EPTA Страницы: 154

Бренды по названию

Популярные бренды

Загрузить еще бренды