Kikusui LIN Series Скачать руководство пользователя | Manualshive

Страница: 48 / 74

background image

48

LIN-JF

6

Operation

This chapter describes how to turn on the product, how to select the impedance, and how to
handle alarms.

Powering On

Turning on the POWER switch

1

Turn on the POWER switch of this product.

The power indicator turns on, and the cooling fan starts running.

Panel Operation

The panel control described below is for the LIN1020JF and LIN3020JF. The OP01-
LIN1020JF is used in combination with the LIN1020JF and is controlled from the LIN1020JF
panel. The OP01-LIN1020JF panel is for display only. It shows information according to the
operations performed on the LIN1020JF panel.

Selecting the impedance

There are impedance (IMPEDANCE SELECT) switches for Z1, Z2, Z3, and BYPASS. Each
switch is an independent bi-stable push switch. The switch is on when the button is pressed
in (illumination area is turned on) and off when the button is not (illumination area is turned
off). The button toggles between on and off each time you press it.
The switches are not interlocked. As such, if multiple switches are on at the same time, all the
selected circuits will be connected in parallel.
If all switches are off, no impedance is selected, and the N-phase circuit is open.

1

Turn off the AC power supply output.

2

Turn off the REMOTE switch on the front panel.

Set the switch so that the button is not pressed in. The illumination area of the
REMOTE switch will turn off, and panel control will be enabled.

3

Turn off all impedance (IMPEDANCE SELECT) switches on the front
panel.

Press one of the Z1, Z2, Z3, and BYPASS switches.
The illumination area of the selected switch will turn on.

4

To select another impedance, press the impedance switch that you want
to turn on and then the switch you want to turn off.

LIN1020JF

LIN3020JF

«
...
46
47
48
49
50
...
»

Содержание LIN Series











































































Отзывы:

Нет отзывов

Похожие инструкции для LIN Series

Бренд: Tacx Страницы: 2

Бренд: C.E. Nierhoff & Co Страницы: 7

Infield Rascal Pro

Бренд: ABI Attachments Страницы: 8

Бренд: Abicor Binzel Страницы: 84

Бренд: ABI Attachments Страницы: 5

Бренд: abem Страницы: 47

Бренд: Abely Страницы: 5

Бренд: e+p Elektrik Handels Страницы: 2

Tablet1000 Series

Бренд: Hantek Страницы: 98

Pressure Governor

Бренд: Waterous Страницы: 53

Бренд: Landi Renzo Страницы: 16

Бренд: IBM Страницы: 163

Бренд: Varytec Страницы: 5

Бренд: Saab Страницы: 98

Бренд: Kaixin Страницы: 89

Бренд: Kärcher Страницы: 88

Бренд: MacDon Страницы: 46

Бренд: MacDon Страницы: 82

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды