manualshive.com logo in svg

Kikusui KJM6335, Руководство по эксплуатации, Страница: 61 / 129

Поделиться
Скачать
Kikusui KJM6335 Скачать руководство пользователя страница 61

KJM6335

GPIB Operation

4-3

4.3

GPIB Basic Operation

Messages and terminators

■

Program message

The text of data that is transmitted from the controller(computor or
other controllers) to a device(KJM6335 or other devices) is called a
program message.  Program messages are grouped into two types:
command messages, which carry device data, and query messages,
which request response messages.
Abbreviations are provided for program messages and some
character program data. (Abbreviations omit lower-case characters
from program message headings.)

■

Response message

The text of data that is transmitted from a device to the controller is
called a response message.
All response messages are returned in abbreviations.

■

Message structure

Each message is composed of a program header and data.

■

Terminator

• Program message terminator

The terminator used to mark the end of a program message is
called a program message terminator.

• Response message terminator

The terminator used to mark the end of a response message is
called a response message terminator.

Содержание KJM6335


































































































































Отзывы:

Нет отзывов