Kikusui KJM6335, Руководство по эксплуатации, Страница: 45 / 129

KJM6335 Operation 3-11
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
NOTE
• When measuring a signal, which has been converted both
edges or a single edge using a special equipment, always
set TRIG EDGE (RF) to a single edge (rising edge or
falling edge). If the both-edge setting is selected,
measurement will be disabled.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
For detail, see 3.7 "Symmetry and Slice Level" and 2.1 "Front
Panel". For setting the slice level when SYMMETRY is set to
MANUAL, see 3.4.1 "Measuring to Use RF Signal after Slicing
and Regenerated Clock Signal".
For setting the delay when DELAY is set to MANUAL, see 3.8
"Adjusting Delay".
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
NOTE • The characteristics of the meter comply with Compact
Disc Reference Measuring Methods Specification
Guideline Ver.1.0 May 1999. A difference between the
characteristics of the symmetry follow-up circuit (slicer
circuit) in the CD player and those of the instrument will
result in a difference in measured values with respect to
3.4.1 "Measuring to Use RF Signal after Slicing and
Regenerated Clock Signal".
• Set the MEDIA to the speed of the CD player measured.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○