Kikusui KJM6335, Руководство по эксплуатации, Страница: 48 / 129

3-14 Operation KJM6335
3.6 Setting the Contents of the Setup Memory
A maximum of four types of instrument panel settings can be
stored in the setup memory for later recall.
Store method:
When you press the MEMORY SELECT key, one of LEDs "1" to
"4", indicating the setup memory address at the left of the key,
blinks.
Each time you press the key, the setup memory address switches to
1, 2, 3, and 4 in sequence; select the setup memory address where
you wish to store the panel settings. Pressing the MEMORY
RECALL/STORE key with the SHIFT key held down, stores the
panel settings at the selected setup memory address.
The selection state (condition in which the LED is blinking) will be
automatically cancelled unless you accept a store action within 3
seconds, and will return to the status that existed before the
MEMORY SELECT key was pressed. Moreover, if you change
the panel settings in the selection state, the LED goes off.
Recall method:
There are two methods of recalling the contents of the setup
memory. One is a direct recall in which the contents of the setup
memory are recalled as soon as the MEMORY RECALL/STORE
key is pressed. The other is a select & recall in which you select the
setup memory address to be recalled using the MEMORY
SELECT key and then perform the recall.
• Direct recall
In this method, the contents of the setup memory will be recalled as
soon as you press the MEMORY RECALL/STORE key. Each
time you press the MEMORY RECALL/STORE key, the setup
memory address switches to 1, 2, 3, and 4 in sequence and the
contents of the setup memory are recalled.
If the condition immediately before pressing the MEMORY
RECALL/STORE key is a recall status of the setup memory (the
LED at the left of the key is lit), pressing the MEMORY RECALL/
STORE key causes the contents of the next setup memory address
to be recalled.