KidKraft Cedar Summit F25745, Инструкция по установке и эксплуатации

Страница: 78 / 135

78
A:
Measure 5/8” (15.9mm) down from the top of the End Wall and place 1 (381) Nest Floor Joist A so that the 2 pre-
drilled holes are on the left side. Before attaching the Nest Joist make sure that it measures 1-7/8” (47.1mm) from the left
edge of the assembly and 1-15/32” (35.5mm) from the right edge. Attach using 6 (S11) #8 x 2” Wood Screws. (fig. 38.1,
38.2 and 38.3)
B: Place (382) Nest Wall Spacer in the opening of the End Wall Panel so that it sits against the floorboards and is
flush with the End Panel. (fig. 38.1 and 38.3)
C: Measure 5/8” (15.9mm) down from the top of (382) Nest Wall Spacer and place 1 (381) Nest Floor Joist A so
that the 2 pre-drilled holes are on the left side, making sure to maintain a measurement of 1-7/8” (47.1mm) from
the left edge of the assembly and 1-15/32” (35.5mm) from the right edge. Attach (381) Nest Floor Joist A and (382)
Nest Wall Spacer using 6 (S11) #8 x 2” Wood Screws. (fig. 38.1, 38.2 and 38.3)
D: From inside the fort center 1 Flat Panel Bracket over the ends of (382) Nest Wall Spacer and (071) Nest End
Panel. Attach each Flat Panel Bracket using 4 (S0) #8 x 7/8” Truss Screws. (fig. 38.4)
Step 38: Install Nest Wall Joists
Fig. 38.1
Fig. 38.4
Fig. 38.2
Fig. 38.3
S11
5/8”
(15.9mm)
5/8”
(15.9mm)
End Wall
381
381 382
382
382
1-7/8”
(47.1mm)
1-15/32”
(35.5mm)
Flush
Bracket Inside View
S11
S11
S0
x 6
x 6
x 4 per
bracket
2 x Nest Floor Joist A 1-1/2 x 1-1/2 x 35”
1 x Nest Wall Spacer 1-1/4 x 4 x 31”
382
381
Wood Parts Hardware Other Parts
12 x #8 x 2” Wood Screw
8 x #8 x 7/8” Truss Screw
2 x Flat Panel Bracket
S11
S0
Top View
381
381
381