Kidde Fire Protection 400 Series Скачать руководство пользователя страница 116

Страница: 116 / 190

Installation

July 2018

4-28

06-237518-001

4-13.2

Cylinder

Each cylinder shall be labelled with the following:
•

Agent Instruction label: This labels shall be attached on the front of the cylinders and at

same height. The purpose of the label is to provide filling information, transport/safety in-

formation, inspection information and general precautions to be taken during re-installation

of the cylinder.

•

Agency Label: Label listing the approving agencies.

•

Transport label: Commonly referred to as a banana label which is curved and located on

the cylinder shoulder

4-13.3

Selector Valves

Each selector valve shall be provided with a sign or label clearly stating the name of the

associated protected space to which the valve shall conveys the Agent.

4-13.4

Protected Enclosure

4-13.4.1 Access Doors

Doors leading to and from the protected area to be fitted with appropriate signs (P/N K4076-

2), or signs in local language with same text that comply with associated National Standards.
All doors from an area protected by a gaseous extinguishing system should open outwards and

be fitted with automatic door closing devices.

4-13.5

Warning Alarms

Audible and visual alarms to be provided within the protected space, such alarms shall continue

to operate after discharge until all appropriate action has been taken.

4-13.5.1 Pressure Relief Vents

Relief vent openings (except at high level) to display warning sign, “Vent for Inert Gas - Keep

Clear” (P/N 2172-0200).

Содержание 400 Series































































































































































































Результаты поиска

Содержание 400 Series

Отзывы:

Похожие инструкции для 400 Series

Бренды по названию

Популярные бренды

Kidde Fire Protection 400 Series, Руководство по проектированию, установке, эксплуатации и техническому обслуживанию

Результаты поиска

Содержание 400 Series

Отзывы:

Похожие инструкции для 400 Series

Бренды по названию

Популярные бренды