Kia niro 2023, Руководство пользователя, Страница: 329 / 440

15
7
7
What to do in an emergency If you have a flat tire (with spare tire)
CAUTION
Check whether the tire hold-down wing
bolt is fixed on the center of the tire
wheel. If the tire hold-down wing bolt is
not fixed securely, the tire may move
around during driving and noise may
sound.
Changing tires
Operation
1. Stop the vehicle to a safe leveled
place away from traffic.
2. Turn the hazard warning flasher on.
3. Change the gear to P (Park) and turn
the vehicle off.
4. Set the parking brake.
5. Remove the jack, wheel lug nut
wrench and the spare tire from the
vehicle.
6. Block both the front and rear of wheel
that is diagonally opposite the jack
position.
7. Loosen the wheel lug nuts counter -
clockwise one turn each. Do not
remove any wheel lug nuts until the
tire has been raised off the ground.
8. Place the jack at the front (1) or rear
(2) designated jacking positions. The
jacking positions are plates that are
welded to the frame with two tabs
and a raised dot to index with the jack.
9. Insert the jack handle into the jack
and turn it clockwise. Raise the vehicle
until the tire just clears the ground.
This measurement is approximately
30 mm (1.2 inches). Make sure the
vehicle is stable and there is no
chance for movement or slippage
before removing the wheel lug nuts.
ODEPPH062021L
ODEPPH062009L_2
ODEPPH062007L
ODEPPH062010L_2
ODEPPH062011L