Kia niro 2023, Руководство пользователя, Страница: 137 / 440

23
5
5
Features of your vehicle Hood
Hood
Opening the hood
1 Hood release lever
2 Hood secondary latch
3 Hood
4 Support rod
Operation
1. Pull the hood release lever (1).
2. Push the secondary latch (2) to the
left.
3. Lift the hood (3) upwards.
4. Pull out the support rod (4).
5. Hold the hood opened with the sup
-
port rod.
WARNING
僅 Open the hood after turning off the
engine on a flat surface, shifting the
gear to the P (Park) position and set
-
ting the parking brake.
僅 Grasp the support rod in the area
wrapped in rubber. The rubber will
help prevent you from being burned
by hot metal when the engine is hot.
僅 The support rod must be inserted
completely into the hole provided in
the hood whenever you inspect the
engine compartment. This will prevent
the hood from falling and possibly
injuring you.
Closing the hood
Operation
1. Before closing the hood, check the
following:
僅 All filler caps in the engine com
-
partment must be correctly
installed.
僅 Gloves, rags or any other combusti
-
ble material must be removed from
the engine compartment.
2. Lower the hood until it is about 30 cm
(12 inches) above the closed position
and let it drop. Make sure that it locks
into place.
3. Check that the hood has engaged
properly.
僅 If the hood can be raise slightly, it is
not properly engaged.
僅 Open it again and close it with a lit
-
tle more force.
ODEPPH042027L_4
ODEPV042074
ODEPPH042028L