KI WorkZone Series, Руководство по сборке

Страница: 7 / 24

Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
7
WorkZone
®
Single Universal Overhead Shelf
Assembly Instructions
4. Position shelf back as illustrated,
with studs facing the rear. Orient the
shelf back into position, inserting
the studs on the back through the
mounting holes in rearflanges of
both installed shelf sides. Use six
#10-24 serrated nuts to secure back
to sides (Figure 6).
5. Place the shelf bottom into position
between the shelf sides, above the
lower mounting flanges and tight
to the installed shelf back. Nest the
bottom shelf down onto both shelf
sides lower mounting flanges and
align mounting holes. Secure the
bottom shelf to the shelf sides from
underneath, at each end using two
#8-32 x
1
/
2
” screws (Figure 7).
6. At the lower rear of the shelf back,
secure the shelf back to the rear edge
of the bottom shelf using two
#8-32 x
1
/
2
” screws (Figure 7).
Figure 6
shelf side
(right-hand)
shelf side
(left-hand)
right-hand
stanchion
left-hand
stanchion
WorkZone
Desk
#10-24
serrated nut
#10-24
serrated nut
shelf
back
shelf side
(right-hand)
shelf side
(left-hand)
right-hand
stanchion
left-hand
stanchion
shelf
back
#8-32 x /
1
2
"
screw
Figure 7
#8-32 x /
1
2
"
screw
shelf
bottom