KI WorkZone Series, Руководство по сборке

Страница: 13 / 24

Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
13
WorkZone
®
Dual Universal Overhead Shelf
Assembly Instructions
Note: For installations of dual
overhead shelves onto 66” long
desks, one shelf back will be 36”
and the other will be 30”. The center
stanchion should be installed to
accommodate the size differences.
4. Position shelf backs as illustrated,
with studs facing the rear. Orient the
shelf backs into position, inserting
the studs on the backs through the
mounting holes in rear flanges of
both sets of installed shelf sides.
Use six #10-24 serrated nuts per
shelf back to secure backs to sides
(Figure 13).
5. Place the shelf bottoms into position
between the shelf sides, above the
lower mounting flanges and tight to
the installed shelf backs. Nest the
bottom shelves down onto both shelf
sides lower mounting flanges and
align mounting holes. Secure each
bottom shelf to the shelf sides from
underneath, at each end using two
#8-32 x
1
/
2
” screws (Figure 13).
6. At the lower rear of each shelf back,
secure the shelf back to the rear edge
of the bottom shelf using two
#8-32 x
1
/
2
” screws as illustrated
(Figure 13).
Figure 13
#8-32 x /
1
2
"
screw
shelf
bottom (36 ) "
#8-32 x /
1
2
"
screw
#10-24
serrated nut
shelf
bottom (30 ) "
shelf
back (36 ) "
shelf
back (30 ) "
#8-32 x /
1
2
"
screw