KI WorkZone Series, Руководство по сборке

Страница: 6 / 24

6
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
WorkZone
®
Single Universal Overhead Shelf
Assembly Instructions
Single Universal Overhead Shelf
Installation
Important: WorkZone desk must be
fully assembled prior to installing the
overhead shelf unit.
1. Begin by removing grommet covers
from the back sides at the top of the
desk where the overhead shelf will
install (Figure 5).
2. Reference Figure 5 below to identify
the left- and right-hand stanchions,
as well as the left- and right-hand
shelf sides. One side at a time,
position the appropriate stanchion
as illustrated such that the lower
mounting bracket of the stanchion
inserts into the grommet hole. Align
the mounting holes in the bracket
with the holes in the top of the leg
and secure using two #10-32 x
1
/
2
”
screws (Figure 5).
3. Orient the right- and left-hand shelf
sides as illustrated, then nest them
into the tops of the stanchions and
align the mounting holes. Secure
from the inside using two
#8-32 x
1
/
2
” screws at each stanchion
side (Figure 5).
Figure 5
#10-32 x /
1
2
"
screw
#8-32 x /
1
2
"
screw
shelf side
(right-hand)
shelf side
(left-hand)
right-hand
stanchion
stanchion
insert (outer)
WorkZone
Desk
left-hand
stanchion
stanchion
insert (inner)
grommet
hole
grommet
cover