KI WorkZone Series, Руководство по сборке

Страница: 16 / 24

16
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
WorkZone
®
Corner Universal Overhead Cabinet
Assembly Instructions
7. Position cabinet back as illustrated,
with studs facing the rear. Orient
the cabinet back into position,
inserting the studs on the cabinet
back through the mounting holes in
rear flanges of both installed cabinet
sides. Use six #10-24 serrated nuts
to secure back to sides (Figure 16).
8. Place the shelf bottom into position
between the cabinet sides, above the
lower mounting flanges and tight
to the installed shelf back. Nest the
bottom shelf down onto both cabinet
sides lower mounting flanges and
align mounting holes. Secure the
bottom shelf to the cabinet sides
from underneath, at each end using
two #8-32 x
1
/
2
” screws (Figure 17).
9. At the lower rear of the shelf back,
secure the shelf back to the rear edge
of the bottom shelf using two
#8-32 x
1
/
2
” screws (Figure 17).
Figure 16
right-hand
stanchion
left-hand
corner
stanchion
WorkZone
Corner Desk
#10-24
serrated nut
#10-24
serrated nut
cabinet side
(right-hand)
cabinet side
(left-hand)
cabinet
back
WorkZone
Corner Desk
Figure 17
cabinet side
(right-hand)
cabinet side
(left-hand)
right-hand
stanchion
left-hand
stanchion
cabinet
back
shelf
bottom
#8-32 x /
1
2
"
screw
#8-32 x /
1
2
"
screw