12
Universal Overhead Storage
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
4. Pull the shelf down and adjust until
all screw holes in the side flanges
are visible through the slots in the
support flanges. Install four
#8 x
3
/
8
”self-tapping screws through
the slots in the side panel support
flanges (Figure 3).
5. When two or more shelves are
installed next to each other, fasten
them together with a ganger plate.
Secure ganger plate to the shelf
bottoms with two #8 screws
(Figure 4).
6. To install shelf divider (optional). first
place front hook into slot of shelf
bottom, then rotate rear of divider
until tab snaps into vertical slot of
shelf back. To remove divider, press
lightly on shelf back to release rear
tab and rotate out (Figure 5).
shelf
divider
Figure 5
shelf back
front
hook
front
slot
shelf bottom
#8 screws
ganger plate
Figure 4
#8 x /
3
8
"
self-tapping screw
Figure 3
