manualshive.com logo in svg

Kguard MR-4020, Руководство пользователя

Поделиться
Скачать
Kguard MR-4020 Скачать руководство пользователя страница 66

ENGLISH

Mars Series: Operating the NVR

66

NVR User’s Manual

Wait until message appears on the screen. Click 

OK

.

•  Reboot

: If the system hangs or you wish to restart the system at anytime, select this option to reboot the NVR 

instantly. After you click Reboot, a warning message appears, asking for your confirmation to reboot. Click 

OK

.

• 

Shut Down

: To maintain the integrity  of the video recording and configuration settings, select this option to 

power off the NVR properly.

•  Load Settings

: Select this option to import the settings that you have configured earlier. To import a saved 

configuration file, select the configuration file and save it into a USB flash drive. To resume with importing 
process, plug the USB flash drive to the USB port of the device and click 

Load Settings

. 

 

Save Settings

: Select this option to save the NVR current settings such as the video recording settings, network 

configurations, and etc. To save your current configuration settings, plug the USB flash drive to the USB port of 
the device and click 

Save Settings

. 

 

NOTE:

 Before saving the settings, be sure to plug a USB device into the USB port of the NVR.

•  Camera Update

: Select this option to update the camera firmware with the latest version. Obtain the firmware 

update file. Save the upgrade file to a folder named “dvrupgrade”, then save the “dvrupgrade” folder in a USB 
flash drive.
To resume with updating process, plug the USB flash drive to the USB port of the NVR, select the camera, and 
click the 

Camera Update

 button.

 NOTE

:

 Do not remove the USB flash drive, turn off the power, or unplug from the power supply while updating.

Содержание MR-4020















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды