ENGLISH
Mars Series: Quick Setup Guide
NVR User’s Manual
17
Step 7: Mount the Camera(s)
If you are convinced that the camera(s) are functioning properly, it is time to mount the camera(s).
Position Gasket
2. Drill the holes and attach the camera.
Use a position gasket to identify the correct position of Insert the plastic washers into the holes. Then place
the screw holes. Then drill three (3) small holes on the the three (3) supplied screws into the three holes at
mounting location. the end of the camera Mount Bracket, and secure
them into the holes on the wall, using a screwdriver.
1. Locate your ideal camera position on the selected surface, for example on the wall.
CAUTION
:
Please avoid installing the camera near the indoor lights, for example under fluorescent light, and do NOT
point the camera to the light directly.
3. Adjust the camera.
Loosen the adjustment screw of the camera, using the When the adjustment is done and the best
star wrench. Adjust the camera position to suit the position is found, tighten the adjustment screw to
monitoring area. fix the position.
90°
