Kguard MR-4020 Скачать руководство пользователя страница 38

Страница: 38 / 78

ENGLISH

Mars Series: Operating the NVR

NVR User’s Manual

•

Color

: Change these values only if it is inevitable. The color changes influence your recording.

To modify the Color, click

Setup

. The

Color Setup

menu opens.

Brightness (BRI)

: Defines how bright the image appears on the display.

Contrast (CON)

: Increases the difference between the darkest black and the whitest white in the image. Modify

the contrast if the sections of the image “grey out”.

Hue

: Changes the color mix of the image.

Saturation (SAT)

: Alters how much color is displayed in the image. The highest the saturation, the brighter and

vivid colors will appear to be. Setting this parameter too high can degrade the image quality.

•

Covert

: Determine if you want to show this channel on the Live Viewing screen or not. Please be noted that if the

connected channel is not displayed on LIve Viewing screen, it does not affect the recording from the channel on
HDD, unless you have disabled the recording for the channel.

Display: Output

• Video Output

: This is the video output of the main monitor that you use for live view display.

• View Setup

: If the

View Setup

is disabled, you will see

SEQ Time

menu option. This option allows you to set the

time in seconds, how long you want the channel to be displayed on the Live Viewing screen. For example, all four
cameras are connected, and the set

SEQ Time

is 001, then press

START SEQ

icon (

) (see

“Pop-Up Menu on

Live Viewing Screen” on page 22

), and the live views fom cameras are displayed in 1 second interval in the

sequence: 4-split display-> Channel 1 -> Channel 2 -> Channel 3 -> Channel 4.

• SEQ Time:

Set how long you want the live view from a channel to be displayed in a sequence.

• View Mode

: This option is available only if you have enabled

View Setup

Single

is the default live mode. It

means that a live view from one channel is displayed in full screen mode.

Содержание MR-4020















































































Результаты поиска

Содержание MR-4020

Отзывы:

Бренды по названию

Популярные бренды

Kguard MR-4020, Руководство пользователя

Результаты поиска

Содержание MR-4020

Отзывы:

Бренды по названию

Популярные бренды