manualshive.com logo in svg

Kguard MR-4020, Руководство пользователя

Поделиться
Скачать
Kguard MR-4020 Скачать руководство пользователя страница 59

ENGLISH

Mars Series: Operating the NVR

NVR User’s Manual

59

Device: Cloud Storage

This feature allows users to see what is happening on your camera site anytime, anywhere through the Internet. 
Sending the snapshots can be set according to time interval and when a motion is detected. See more about 
configuring the cloud storage in 

“Using Cloud Storage” on page 29.

•  Enable:

 Allow cloud settings.

• 

Channel:

 Select from which channels will snapshots be taken and sent to the cloud storage. Snapshots from the 

channels you have not chosen, will not be sent to Dropbox.

•  Time Trigger/Motion Detection

: When the 

Time Trigger

 is set and the 

Motion Detection

 is disabled then 

snapshots are transferred to the Dropbox based on the scheduled time interval.

•  When the 

Time Trigger

 is set and the 

Motion Detection

 as well then the snapshots are transferred to the 

Dropbox on a motion detection and on time interval simultaneously. For example, a camera is installed on the 
front door. When someone enters the room, the motion is triggered. The snapshots are then sent to the cloud 
storage.

• 

Drive Name:

 Enter the cloud storage name for your NVR. When linking the KGuard Cloud Uploader to your 

Dropbox, the Drive Name will be used as the folder name where KGuard uploads the snapshots.

•  Receiver Email:

 Enter your e-mail address that is associated with your Dropbox account. This e-mail address 

is used by the NVR only for sending you the certification e-mail for asking your acceptance to link the NVR to 
the Dropbox. If you successfully receive the cloud storage activation e-mail, you do not need to configure the 
advanced e-mail settings.

Содержание MR-4020















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды