14
Measurement applications
□
Time-domain capability (Option 010)
For viewing reflection and transmission responses in time or
distance domain.
□
Frequency offset (Option 080)
This option enables the PNA Series microwave network
analyzers to set the source frequency independently from
where the receivers are tuned. This ability is important for two
general classes of devices: mixers (and converters) and ampli-
fiers. Option 080 provides a very basic user interface.
□
Scalar-calibrated converter measurements
(Option 082)
With a simple setup and calibration, this application provides
the highest accuracy for conversion-loss (or gain) measure-
ments by combining one-port and power-meter calibrations to
remove mismatch errors. Option 080 required.
□
4-port measurement application
(Option 550)
Adds multiport analyzer mode to any PNA-L network analyzer
with Option x25, x45, or x46 configurable test set, which
enables full 4-port error correction and measurement capabili-
ties using an external test set. Only standard measurement
class is available in the multiport analyzer mode.
□
N-port capabilities (Option 551)
Adds multiport analyzer mode to any PNA network analyzer
with Option x25, x45, or x46 configurable test set, which
enables full N-port error correction and measurement capabili-
ties using an external test set. Only standard measurement
class is available in the multiport analyzer mode.
PNA-L Series Application Options
1. The 5063-9237 kit assumes you have the standard handles
shipped with the instrument. If you do not have handles, order a
5063-9224 kit.
Accessories
□
Rack mount kit without handles
(Option 1CM)
Adds a rack mount (5063-9217) and rail kit (E3663AC) for
use without handles.
□
Rack mount kit with handles (Option 1CP)
Adds a rack mount (5063-9237)
1
and rail kit (E3663AC) for
use with standard supplied handles.