Keysight E36300 Series, Руководство пользователя

Страница: 67 / 108

From the front panel:
1. Press
Utilities
>
I/O Config
>
Digital IO
to access the Digital I/O window.
2. Select the pin you wish to configure. For example, press Pin 1 to configure Pin 1.
3. Press
Function
and select
Digital I/O
. Select and program the remaining pins in the same manner. Press
Back
to
return to previous page.
4. Configure the polarity for each of the pin. Press
Polarity Pos
to select Positive and
Polarity Neg
to select
Negative. Select and program the remaining pins in the same manner.
5. The In and Out field only apply to the Digital I/O and Digital In functions. Press
Out
to toggle and enter the binary
bit (0 or 1) into the Out field of the digital I/O window. For Digital I/O function, a binary bit 1 with positive polarity
specify a voltage high at the pin while a binary bit 0 with positive polarity specify a voltage low at the pin. The In field
reflects the condition of the external signal that is applied to the pins.
From the remote interface:
To configure the digital I/O function for pins 1 through 3:
DIG:PIN 1:FUNC DIO
DIG:PIN 2:FUNC DIO
DIG:PIN 3:FUNC DIO
To configure the pin polarity to positive for pins 1 through 3:
DIG:PIN 1:POL POS
DIG:PIN 2:POL POS
DIG:PIN 3:POL POS
To send a binary weighted value to configure pins 1 through 3 as “111”:
DIG:OUTP:DATA 7
Keysight E36300 Series User's Guide 67